Linear Scale Potentiometer

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.

Specifications:

• Standard Resistance Value (KΩ): 1, 2, 3, 5,10KΩ
• Resistance Tolerance (%): Precision level ±10, Standard ±15
• Independent Linearity (%): 0.02%, 0.05%, 0.1%, 0.2%
• TET: 10mm - 800mm (Increasing every 25mm)
• Theoretical Electrical Travel (AET, mm): TET ±1
• Lift (Cycle): 1×10°

Bullet Points:

• Measuring range: 25 mm to 800 mm (Increasing every 25 mm) - High precision: 0.1% ~0.02 mm
• Good repeatability & the service life is long
• Theoretically unlimited resolution / Temperature stability is strong
• Wiring methods: Electrical connector, Compatibility: Plastic Injection Molding Machine

Available in Rod & Slide Type
Sizes(mm): 100mm, 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 500mm, 600mm, 650mm, 700mm, 900mm

Additional Information:

• Item Code: LINEAR
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Chennai, Ahmedabad
• Production Capacity: As per customers request
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.

 

Specifications:

• Compatibility: Plastic Injection Molding Machine
• Standard Resistance Value (KΩ): 1, 2, 3, 5,10KΩ
• Resistance Tolerance (%): Precision level ±10, Standard ±15
• Independent Linearity (%): 0.02%, 0.05%, 0.1%, 0.2%
• TET: 10mm - 800mm (Increasing every 25mm)
• Theoretical Electrical Travel (AET, mm): TET ±1
• Power Rating (W, at 70°C: L10-L50, 1.0W / L75-800, 2.0W
• Resolution: Theoretically Infinite
• Insulation Resistance (MΩ): ≥500 (500VCD)
• Dielectric Strength (V): 500V (AC.RMS) 1min
• Output Smoothness (%): ≤0.1
• Mechanical Travel (MT, mm): TET +8±2
• Operating Temperature Range (°C): -55-+125
• Lift (Cycle): 1×10°
• Operating Force (Max, N): 0.98~2.94

Bullet Points:

• Measuring range: 25 mm to 800 mm (Increasing every 25 mm) - High precision: 0.1% ~0.02 mm
• Good repeatability & the service life is long
• Theoretically unlimited resolution / Temperature stability is strong
• Wiring methods: Electrical connector, Compatibility: Plastic Injection Molding Machine

Linear Scale Slide Type Available Sizes: 100mm, 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 500mm, 600mm, 650mm, 700mm, 900mm

Additional Information:

• Item Code: SLIDE002
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Chennai, Ahmedabad
• Production Capacity: As per customers request
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.

Specifications:

• Compatibility: Plastic Injection Molding Machine
• Standard Resistance Value (KΩ): 1, 2, 3, 5,10KΩ
• Resistance Tolerance (%): Precision level ±10, Standard ±15
• Independent Linearity (%): 0.02%, 0.05%, 0.1%, 0.2%
• TET: 10mm - 800mm (Increasing every 25mm)
• Theoretical Electrical Travel (AET, mm): TET ±1
• Power Rating (W, at 70°C: L10-L50, 1.0W / L75-800, 2.0W
• Resolution: Theoretically Infinite
• Insulation Resistance (MΩ): ≥500 (500VCD)
• Dielectric Strength (V): 500V (AC.RMS) 1min
• Output Smoothness (%): ≤0.1
• Mechanical Travel (MT, mm): TET +8±2
• Operating Temperature Range (°C): -55-+125
• Lift (Cycle): 1×10°
• Operating Force (Max, N): 0.98~2.94

Bullet Points:

• Measuring range: 25 mm to 800 mm (Increasing every 25 mm) - High precision: 0.1% ~0.02 mm
• Good repeatability & the service life is long
• Theoretically unlimited resolution / Temperature stability is strong
• Wiring methods: Electrical connector, Compatibility: Plastic Injection Molding Machine

Linear Scale Slide Type Available Sizes: 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 500mm, 600mm, 650mm, 700mm, 900mm

Additional Information:

• Item Code: SLIDE001
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Chennai, Ahmedabad
• Production Capacity: As per customers request
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.

Specifications:

• Compatibility: Plastic Injection Molding Machine
• Standard Resistance Value (KΩ): 1, 2, 3, 5,10KΩ
• Resistance Tolerance (%): Precision level ±10, Standard ±15
• Independent Linearity (%): 0.02%, 0.05%, 0.1%, 0.2%
• TET: 10mm - 800mm (Increasing every 25mm)
• Theoretical Electrical Travel (AET, mm): TET ±1
• Power Rating (W, at 70°C: L10-L50, 1.0W / L75-800, 2.0W
• Resolution: Theoretically Infinite
• Insulation Resistance (MΩ): ≥500 (500VCD)
• Dielectric Strength (V): 500V (AC.RMS) 1min
• Output Smoothness (%): ≤0.1
• Mechanical Travel (MT, mm): TET +8±2
• Operating Temperature Range (°C): -55-+125
• Lift (Cycle): 1×10°
• Operating Force (Max, N): 0.98~2.94

Bullet Points:

• Measuring range: 25 mm to 800 mm (Increasing every 25 mm) - High precision: 0.1% ~0.02 mm
• Good repeatability & the service life is long
• Theoretically unlimited resolution / Temperature stability is strong
• Wiring methods: Electrical connector, Compatibility: Plastic Injection Molding Machine

Linear Scale Rod Type Available Sizes: 100mm, 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 500mm, 600mm, 650mm, 700mm, 900mm

Additional Information:

• Item Code: ROD001
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Chennai, Ahmedabad
• Production Capacity: As per customers request
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.
Specifications:

• Compatibility Plastic Injection Molding Machine
• Standard Resistance Value (KΩ) 1, 2, 3, 5,10KΩ
• Resistance Tolerance (%) Precision level +-10, Standard +-15
• Independent Linearity (%) 0.02%, 0.05%, 0.1%, 0.2%
• TET 10mm - 800mm (Increasing every 25mm)
• Theoretical Electrical Travel (AET, mm) TET +-1
• Power Rating (W, at 70 DegreeC L10-L50, 1.0W / L75-800, 2.0W
• Resolution Theoretically Infinite
• Insulation Resistance (MΩ) ≥500 (500VCD)
• Dielectric Strength (V) 500V (AC.RMS) 1min
• Output Smoothness (%) ≤0.1
• Mechanical Travel (MT, mm) TET +8+-2
• Operating Temperature Range ( DegreeC) -55-+125
• Lift (Cycle) 1x10 Degree
• Operating Force (Max, N) 0.98~2.94

Bullet Points

• Measuring range 25 mm to 800 mm (Increasing every 25 mm) - High precision 0.1% ~0.02 mm
• Good repeatability & the service life is long
• Theoretically unlimited resolution / Temperature stability is strong
• Wiring methods Electrical connector, Compatibility Plastic Injection Molding Machine

Features:

• True output linearity over the entire measurement range.
• A fully active strain-gauge bridge to sense spindle displacement giving infinite resolution and excellent linearity.

Linear Scale Rod Type Available Sizes: 100mm, 150mm, 175mm, 200mm, 225mm, 250mm, 275mm, 300mm, 325mm, 350mm, 375mm, 400mm, 425mm, 450mm, 500mm, 600mm, 650mm, 700mm, 900mm

Additional Information:

• Item Code: ROD002
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Chennai, Ahmedabad
• Production Capacity: As per customers request
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.

Product Details:

This series of products are widely used in the industrial automatic control system, display length measurement and continuous monitoring, synchronous control, mobile positioning, mechanical limit positioning and control, closed loop positioning control, measurement and control of line displacement as the electro-mechanical conversion element. These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flow rate control.

Additional Information:

• Item Code: KTR-50mm
• Production Capacity: As per customer requirement
• Delivery Time: Immediate Delivery
• Packaging Details: Cardboard Tube Packaging. Delivery through Trusted Courier Service.