N2S Technologies Private Limited
Perungudi, Chennai, Tamil Nadu
SEND SMS
SEND EMAIL
The Automatic mold temperature controller works on heat exchanging principle using water or oil to precisely control the mold temperature, this reduces the production time and thus produces quality product. One of our main objectives is to offer high quality products and to achieve this goal all our products undergo vigorous tests.
Two types of Mold Temperature available Water & Oil Mold Temperature Controller
Product Details:
| Minimum Order Quantity | 1 Unit |
| Heating Method | 6 KW |
| Pump Power | 0.37 |
| Flow Volume | 35 l/min |
| MTC Type | Oil |
| Tank Capacity | 10 L |
| Dimensions | 760*300*640 mm |
| Heating Capacity | 180 degree celsius |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Heating Method | 6 Kw |
| Pump Power | 0.37 Kw |
| Flow Volume | 35 L/min |
| MTC Type | Water |
| Dimensions | 760*300*640 mm |
| Heating Capacity | 120 degree celsius |
Additional Information:
Product Details:
| Pump Power | 0.75 Kw |
| Flow Volume | 45 L/min |
| Dimensions | 760*300*640 mm |
| Heating Capacity | 120 degree Celsius |
| Pressure Pump | 4 kg/cm |
| Heat Transfer Medium | Clean Water |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Transfer Medium | Water |
| Max Temerature | 100 degree Celsius |
| Pump Kw | 0.37x2 |
| Pump Flow | 42 L/min |
| Loading Distance | 28 m |
| Heating Power | 6x2 kw |
| Inlet/Outlet Diameter | 3/8*4 |
| Dimensions | 730*580*663 |
| Heating Method | 6 Kw |
Additional Information:
