N2S Technologies Private Limited
N2S Technologies Private Limited
Perungudi, Chennai, Tamil Nadu
SEND SMS
SEND EMAIL

Sprue Picker Robot

The sprue picker, a simple pick-and-place robotic device was intended as a low cost method of sprue removal or part and runner separation in the injection molding process. In most cases the low cost of these sprue pickers is maintained by employing a pneumatic motion system as the basis for their design. However, this design configuration provides a low cost robot at the expense of system durability, accuracy, speed and functionality. These desirable and needed features, inherent to the servo driven motion systems, seem unattainable in the present environment of cost conscious sprue picker applications.

Sprue Picker Robot Injection Molding Machine

Sprue Picker Robot Injection Molding Machine
  • Sprue Picker Robot Injection Molding Machine
  • Sprue Picker Robot Injection Molding Machine
Get Best Quote
Approx. Price: Rs 92,426 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
Recommended IMM50-180 ton
Vertical Stroke650 mm
Crosswise Stroke125 mm
Swing Angle60-90 degree
Max Loading2 kg
Dry Take Out Time0.8 sec
Dry Cycle Time5/5.2 sec
Air Consumption15 (NI/Cycle)
PowerAC220V+-10V 50/60HZ
Power Capacity0.2
Air Pressure5kgf/ cm2 0.49Mpa
Max Air Pressure8kgf/cm2 0.8Mpa
Drive ModePneumatic Cylinder
Control SystemSXCX-X1
Weight36/48 kg
BrandYantong

Yantong series Swing-arm robot is applicable to all types of horizontal injection machine of 30-280T for take-out products and sprues. It has ranges of model YT650V and YT850WV, with two types of arms, single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. After installed this robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.

Bullet Points:
  • Linear slider rail and alloy aluminium extrusion applied for arm, low noise, long use life.
  • The telescopic version uses a unique. Nylon belt transmission mechanism inside the vertical arm assembly shorten the time and reducing the height of the whole machine
  • Double arm robots for three-plate molds
  • Use adjustable crosswise part of the handle, don't need tools can be easily adjusted
  • Automatic operation can easily modify the delay time and count parameters
  • LED display important signal, such a security doors, molding finished, allow off mode, a thimble, a product test
  • Output point can be connected to other automation equipment such as conveyor, shear, spray nozzle release agent
Request
Callback


Additional Information:

  • Item Code: YTP650V
  • Pay Mode Terms: T/T (Bank Transfer),Other
  • Port of Dispatch: Chennai
  • Production Capacity: As per customers requirement
  • Delivery Time: Immediate Delivery
Yes! I am Interested
View PDF

Sprue Picker Robot Pick & Place

Sprue Picker Robot Pick & Place
  • Sprue Picker Robot Pick & Place
  • Sprue Picker Robot Pick & Place
  • Sprue Picker Robot Pick & Place
Get Best Quote
Approx. Price: Rs 1.6 Lakh / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
BrandYantong
Air Pressure5kgf/ cm2 0.49Mpa
Control SystemSXCX-X1
Drive ModePneumatic Cylinder
Max Loading2 kg
Vertical Stroke850 mm
Recommended IMM200-280 ton
Crosswise Stroke200 mm
Swing Angle60-90 degree
Dry Take Out Time1.2 sec
Dry Cycle Time5.2 sec
Air Consumption14.5 (NI/Cycle)
PowerAC220V+-10V 50/60HZ
Power Capacity0.2
Max Air Pressure8kgf/cm2 0.8Mpa

Yantong series Swing-arm robot is applicable to all types of horizontal injection machine of 30-280T for take-out products and sprues. It has ranges of model YT650V and YT850WV, with two types of arms, single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. After installed this robot, the productivity will be increased 10-30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.

Bullet Points:
  • Linear slider rail and alloy aluminium extrusion applied for arm, low noise, long use life.The telescopic version uses a unique. Nylon belt transmission mechanism inside the vertical arm assembly shorten the time and reducing the height of the whole machineDouble arm robots for three-plate moldsUse adjustable crosswise part of the handle, don't need tools can be easily adjustedAutomatic operation can easily modify the delay time and count parametersLED display important signal, such a security doors, molding finished, allow off mode, a thimble, a product testOutput point can be connected to other automation equipment such as conveyor, shear, spray nozzle release agent
Request
Callback


Additional Information:

  • Item Code: YTP850WV
  • Port of Dispatch: Chennai
  • Production Capacity: As per customers requirement
  • Delivery Time: Immediate Delivery
Yes! I am Interested
View PDF
X

Explore more products



Reach Us
Rajkumar S (CEO)
16/1, Corporation Road
Perungudi, Chennai- 600096, Tamil Nadu, India



Call Us

Share Us

F GT L


Send E-mailSend SMS